Return to Home  Information about Tupelo Performance Cycles  Tupelo Performance Cycles Dyno Service  Tupelo Performance Cycles Products  Tupelo Performance Cycles Services  Tupelo Performance Cycles Contact Information

WMS Compressor Switch  Zex Dry Nitrous  WMS Power Commander
Wilburn Motor Sports WOT Switch  Tupelo Performance Cycles Nitrous Bottle  Dry Nitrous Spray Bar

Wilburn Motor Sports WOT Switch

Wilburn Motor Sports WOT Switch

This new nitrous switch puts the bottle on the throttle!

Simple installation -
Mount the WMS WOT switch to the 2 nuts underneath the choke arm on the right side of the throttle body assembly. Once mounted, turn the throttle wide open to verify the switch is making contact. You may slightly bend the contact arm to activate closer or further from WOT as you desire.
Wiring: You will need a toggle switch to arm the system so you don’t have nitrous every time you hit WOT. Run a switched 12 volts to one side of the toggle. The other side of the toggle goes to either wire on the WMS WOT switch. Connect the other wire on the WMS WOT switch to either wire on the nitrous solenoid. The other wire on the NOS solenoid goes to ground.

WOT Switch: $24.95